Contract Address Details

0x216B4B4Ba9F3e719726886d34a177484278Bfcae

Contract Name
TokenTransferProxy
Creator
0xdef171–6fee57 at 0xaa0608–e7df3a
Balance
0 AVAX
Tokens
Fetching tokens...
Transactions
Transfers
Gas Used
Last Balance Update
5808117
Contract name:
TokenTransferProxy




Optimization enabled
true
Compiler version
v0.7.5+commit.eb77ed08




Optimization runs
1000000
EVM Version
default




Verified at
2021-09-07 14:10:10.260596Z

Contract source code

// File: openzeppelin-solidity/contracts/utils/EnumerableSet.sol
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Library for managing
* https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
* types.
*
* Sets have the following properties:
*
* - Elements are added, removed, and checked for existence in constant time
* (O(1)).
* - Elements are enumerated in O(n). No guarantees are made on the ordering.
*
* ```
* contract Example {
* // Add the library methods
* using EnumerableSet for EnumerableSet.AddressSet;
*
* // Declare a set state variable
* EnumerableSet.AddressSet private mySet;
* }
* ```
*
* As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
* and `uint256` (`UintSet`) are supported.
*/
library EnumerableSet {
// To implement this library for multiple types with as little code
// repetition as possible, we write it in terms of a generic Set type with
// bytes32 values.
// The Set implementation uses private functions, and user-facing
// implementations (such as AddressSet) are just wrappers around the
// underlying Set.
// This means that we can only create new EnumerableSets for types that fit
// in bytes32.
struct Set {
// Storage of set values
bytes32[] _values;
// Position of the value in the `values` array, plus 1 because index 0
// means a value is not in the set.
mapping (bytes32 => uint256) _indexes;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function _add(Set storage set, bytes32 value) private returns (bool) {
if (!_contains(set, value)) {
set._values.push(value);
// The value is stored at length-1, but we add 1 to all indexes
// and use 0 as a sentinel value
set._indexes[value] = set._values.length;
return true;
} else {
return false;
}
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function _remove(Set storage set, bytes32 value) private returns (bool) {
// We read and store the value's index to prevent multiple reads from the same storage slot
uint256 valueIndex = set._indexes[value];
if (valueIndex != 0) { // Equivalent to contains(set, value)
// To delete an element from the _values array in O(1), we swap the element to delete with the last one in
// the array, and then remove the last element (sometimes called as 'swap and pop').
// This modifies the order of the array, as noted in {at}.
uint256 toDeleteIndex = valueIndex - 1;
uint256 lastIndex = set._values.length - 1;
// When the value to delete is the last one, the swap operation is unnecessary. However, since this occurs
// so rarely, we still do the swap anyway to avoid the gas cost of adding an 'if' statement.
bytes32 lastvalue = set._values[lastIndex];
// Move the last value to the index where the value to delete is
set._values[toDeleteIndex] = lastvalue;
// Update the index for the moved value
set._indexes[lastvalue] = toDeleteIndex + 1; // All indexes are 1-based
// Delete the slot where the moved value was stored
set._values.pop();
// Delete the index for the deleted slot
delete set._indexes[value];
return true;
} else {
return false;
}
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function _contains(Set storage set, bytes32 value) private view returns (bool) {
return set._indexes[value] != 0;
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function _length(Set storage set) private view returns (uint256) {
return set._values.length;
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function _at(Set storage set, uint256 index) private view returns (bytes32) {
require(set._values.length > index, "EnumerableSet: index out of bounds");
return set._values[index];
}
// Bytes32Set
struct Bytes32Set {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
return _add(set._inner, value);
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
return _remove(set._inner, value);
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
return _contains(set._inner, value);
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(Bytes32Set storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
return _at(set._inner, index);
}
// AddressSet
struct AddressSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(AddressSet storage set, address value) internal returns (bool) {
return _add(set._inner, bytes32(uint256(value)));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(AddressSet storage set, address value) internal returns (bool) {
return _remove(set._inner, bytes32(uint256(value)));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(AddressSet storage set, address value) internal view returns (bool) {
return _contains(set._inner, bytes32(uint256(value)));
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(AddressSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(AddressSet storage set, uint256 index) internal view returns (address) {
return address(uint256(_at(set._inner, index)));
}
// UintSet
struct UintSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(UintSet storage set, uint256 value) internal returns (bool) {
return _add(set._inner, bytes32(value));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(UintSet storage set, uint256 value) internal returns (bool) {
return _remove(set._inner, bytes32(value));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(UintSet storage set, uint256 value) internal view returns (bool) {
return _contains(set._inner, bytes32(value));
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function length(UintSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(UintSet storage set, uint256 index) internal view returns (uint256) {
return uint256(_at(set._inner, index));
}
}
// File: openzeppelin-solidity/contracts/utils/Address.sol
pragma solidity >=0.6.2 <0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: value }(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: openzeppelin-solidity/contracts/GSN/Context.sol
pragma solidity >=0.6.0 <0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// File: openzeppelin-solidity/contracts/access/AccessControl.sol
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Contract module that allows children to implement role-based access
* control mechanisms.
*
* Roles are referred to by their `bytes32` identifier. These should be exposed
* in the external API and be unique. The best way to achieve this is by
* using `public constant` hash digests:
*
* ```
* bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
* ```
*
* Roles can be used to represent a set of permissions. To restrict access to a
* function call, use {hasRole}:
*
* ```
* function foo() public {
* require(hasRole(MY_ROLE, msg.sender));
* ...
* }
* ```
*
* Roles can be granted and revoked dynamically via the {grantRole} and
* {revokeRole} functions. Each role has an associated admin role, and only
* accounts that have a role's admin role can call {grantRole} and {revokeRole}.
*
* By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
* that only accounts with this role will be able to grant or revoke other
* roles. More complex role relationships can be created by using
* {_setRoleAdmin}.
*
* WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to
* grant and revoke this role. Extra precautions should be taken to secure
* accounts that have been granted it.
*/
abstract contract AccessControl is Context {
using EnumerableSet for EnumerableSet.AddressSet;
using Address for address;
struct RoleData {
EnumerableSet.AddressSet members;
bytes32 adminRole;
}
mapping (bytes32 => RoleData) private _roles;
bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;
/**
* @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
*
* `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
* {RoleAdminChanged} not being emitted signaling this.
*
* _Available since v3.1._
*/
event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);
/**
* @dev Emitted when `account` is granted `role`.
*
* `sender` is the account that originated the contract call, an admin role
* bearer except when using {_setupRole}.
*/
event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Emitted when `account` is revoked `role`.
*
* `sender` is the account that originated the contract call:
* - if using `revokeRole`, it is the admin role bearer
* - if using `renounceRole`, it is the role bearer (i.e. `account`)
*/
event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Returns `true` if `account` has been granted `role`.
*/
function hasRole(bytes32 role, address account) public view returns (bool) {
return _roles[role].members.contains(account);
}
/**
* @dev Returns the number of accounts that have `role`. Can be used
* together with {getRoleMember} to enumerate all bearers of a role.
*/
function getRoleMemberCount(bytes32 role) public view returns (uint256) {
return _roles[role].members.length();
}
/**
* @dev Returns one of the accounts that have `role`. `index` must be a
* value between 0 and {getRoleMemberCount}, non-inclusive.
*
* Role bearers are not sorted in any particular way, and their ordering may
* change at any point.
*
* WARNING: When using {getRoleMember} and {getRoleMemberCount}, make sure
* you perform all queries on the same block. See the following
* https://forum.openzeppelin.com/t/iterating-over-elements-on-enumerableset-in-openzeppelin-contracts/2296[forum post]
* for more information.
*/
function getRoleMember(bytes32 role, uint256 index) public view returns (address) {
return _roles[role].members.at(index);
}
/**
* @dev Returns the admin role that controls `role`. See {grantRole} and
* {revokeRole}.
*
* To change a role's admin, use {_setRoleAdmin}.
*/
function getRoleAdmin(bytes32 role) public view returns (bytes32) {
return _roles[role].adminRole;
}
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function grantRole(bytes32 role, address account) public virtual {
require(hasRole(_roles[role].adminRole, _msgSender()), "AccessControl: sender must be an admin to grant");
_grantRole(role, account);
}
/**
* @dev Revokes `role` from `account`.
*
* If `account` had been granted `role`, emits a {RoleRevoked} event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function revokeRole(bytes32 role, address account) public virtual {
require(hasRole(_roles[role].adminRole, _msgSender()), "AccessControl: sender must be an admin to revoke");
_revokeRole(role, account);
}
/**
* @dev Revokes `role` from the calling account.
*
* Roles are often managed via {grantRole} and {revokeRole}: this function's
* purpose is to provide a mechanism for accounts to lose their privileges
* if they are compromised (such as when a trusted device is misplaced).
*
* If the calling account had been granted `role`, emits a {RoleRevoked}
* event.
*
* Requirements:
*
* - the caller must be `account`.
*/
function renounceRole(bytes32 role, address account) public virtual {
require(account == _msgSender(), "AccessControl: can only renounce roles for self");
_revokeRole(role, account);
}
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event. Note that unlike {grantRole}, this function doesn't perform any
* checks on the calling account.
*
* [WARNING]
* ====
* This function should only be called from the constructor when setting
* up the initial roles for the system.
*
* Using this function in any other way is effectively circumventing the admin
* system imposed by {AccessControl}.
* ====
*/
function _setupRole(bytes32 role, address account) internal virtual {
_grantRole(role, account);
}
/**
* @dev Sets `adminRole` as ``role``'s admin role.
*
* Emits a {RoleAdminChanged} event.
*/
function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
emit RoleAdminChanged(role, _roles[role].adminRole, adminRole);
_roles[role].adminRole = adminRole;
}
function _grantRole(bytes32 role, address account) private {
if (_roles[role].members.add(account)) {
emit RoleGranted(role, account, _msgSender());
}
}
function _revokeRole(bytes32 role, address account) private {
if (_roles[role].members.remove(account)) {
emit RoleRevoked(role, account, _msgSender());
}
}
}
// File: openzeppelin-solidity/contracts/token/ERC20/IERC20.sol
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: openzeppelin-solidity/contracts/math/SafeMath.sol
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
// File: openzeppelin-solidity/contracts/token/ERC20/SafeERC20.sol
pragma solidity >=0.6.0 <0.8.0;
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using SafeMath for uint256;
using Address for address;
function safeTransfer(IERC20 token, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(IERC20 token, address spender, uint256 value) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
// solhint-disable-next-line max-line-length
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).add(value);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
// File: original_contracts/routers/IRouter.sol
pragma solidity 0.7.5;
interface IRouter {
/**
* @dev Certain routers/exchanges needs to be initialized.
* This method will be called from Augustus
*/
function initialize(bytes calldata data) external;
/**
* @dev Returns unique identifier for the router
*/
function getKey() external pure returns(bytes32);
event Swapped(
bytes16 uuid,
address initiator,
address indexed beneficiary,
address indexed srcToken,
address indexed destToken,
uint256 srcAmount,
uint256 receivedAmount,
uint256 expectedAmount
);
event Bought(
bytes16 uuid,
address initiator,
address indexed beneficiary,
address indexed srcToken,
address indexed destToken,
uint256 srcAmount,
uint256 receivedAmount
);
event FeeTaken(
uint256 fee,
uint256 partnerShare,
uint256 paraswapShare
);
}
// File: original_contracts/ITokenTransferProxy.sol
pragma solidity 0.7.5;
interface ITokenTransferProxy {
function transferFrom(
address token,
address from,
address to,
uint256 amount
)
external;
}
// File: original_contracts/lib/Utils.sol
pragma solidity 0.7.5;
pragma experimental ABIEncoderV2;
interface IERC20Permit {
function permit(address owner, address spender, uint256 amount, uint256 deadline, uint8 v, bytes32 r, bytes32 s) external;
}
library Utils {
using SafeMath for uint256;
using SafeERC20 for IERC20;
address constant ETH_ADDRESS = address(
0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE
);
uint256 constant MAX_UINT = type(uint256).max;
/**
* @param fromToken Address of the source token
* @param fromAmount Amount of source tokens to be swapped
* @param toAmount Minimum destination token amount expected out of this swap
* @param expectedAmount Expected amount of destination tokens without slippage
* @param beneficiary Beneficiary address
* 0 then 100% will be transferred to beneficiary. Pass 10000 for 100%
* @param path Route to be taken for this swap to take place
*/
struct SellData {
address fromToken;
uint256 fromAmount;
uint256 toAmount;
uint256 expectedAmount;
address payable beneficiary;
Utils.Path[] path;
address payable partner;
uint256 feePercent;
bytes permit;
uint256 deadline;
bytes16 uuid;
}
struct MegaSwapSellData {
address fromToken;
uint256 fromAmount;
uint256 toAmount;
uint256 expectedAmount;
address payable beneficiary;
Utils.MegaSwapPath[] path;
address payable partner;
uint256 feePercent;
bytes permit;
uint256 deadline;
bytes16 uuid;
}
struct SimpleData {
address fromToken;
address toToken;
uint256 fromAmount;
uint256 toAmount;
uint256 expectedAmount;
address[] callees;
bytes exchangeData;
uint256[] startIndexes;
uint256[] values;
address payable beneficiary;
address payable partner;
uint256 feePercent;
bytes permit;
uint256 deadline;
bytes16 uuid;
}
struct Adapter {
address payable adapter;
uint256 percent;
uint256 networkFee;
Route[] route;
}
struct Route {
uint256 index;//Adapter at which index needs to be used
address targetExchange;
uint percent;
bytes payload;
uint256 networkFee;//Network fee is associated with 0xv3 trades
}
struct MegaSwapPath {
uint256 fromAmountPercent;
Path[] path;
}
struct Path {
address to;
uint256 totalNetworkFee;//Network fee is associated with 0xv3 trades
Adapter[] adapters;
}
function ethAddress() internal pure returns (address) {return ETH_ADDRESS;}
function maxUint() internal pure returns (uint256) {return MAX_UINT;}
function approve(
address addressToApprove,
address token,
uint256 amount
) internal {
if (token != ETH_ADDRESS) {
IERC20 _token = IERC20(token);
uint allowance = _token.allowance(address(this), addressToApprove);
if (allowance < amount) {
_token.safeApprove(addressToApprove, 0);
_token.safeIncreaseAllowance(addressToApprove, MAX_UINT);
}
}
}
function transferTokens(
address token,
address payable destination,
uint256 amount
)
internal
{
if (amount > 0) {
if (token == ETH_ADDRESS) {
(bool result, ) = destination.call{value: amount, gas: 10000}("");
require(result, "Failed to transfer Ether");
}
else {
IERC20(token).safeTransfer(destination, amount);
}
}
}
function tokenBalance(
address token,
address account
)
internal
view
returns (uint256)
{
if (token == ETH_ADDRESS) {
return account.balance;
} else {
return IERC20(token).balanceOf(account);
}
}
function permit(
address token,
bytes memory permit
)
internal
{
if (permit.length == 32 * 7) {
(bool success,) = token.call(abi.encodePacked(IERC20Permit.permit.selector, permit));
require(success, "Permit failed");
}
}
}
// File: original_contracts/adapters/IAdapter.sol
pragma solidity 0.7.5;
interface IAdapter {
/**
* @dev Certain adapters needs to be initialized.
* This method will be called from Augustus
*/
function initialize(bytes calldata data) external;
/**
* @dev The function which performs the swap on an exchange.
* @param fromToken Address of the source token
* @param toToken Address of the destination token
* @param fromAmount Amount of source tokens to be swapped
* @param networkFee Network fee to be used in this router
* @param route Route to be followed
*/
function swap(
IERC20 fromToken,
IERC20 toToken,
uint256 fromAmount,
uint256 networkFee,
Utils.Route[] calldata route
)
external
payable;
}
// File: openzeppelin-solidity/contracts/access/Ownable.sol
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
// File: original_contracts/TokenTransferProxy.sol
pragma solidity 0.7.5;
/**
* @dev Allows owner of the contract to transfer tokens on behalf of user.
* User will need to approve this contract to spend tokens on his/her behalf
* on Paraswap platform
*/
contract TokenTransferProxy is Ownable, ITokenTransferProxy {
using SafeERC20 for IERC20;
using Address for address;
/**
* @dev Allows owner of the contract to transfer tokens on user's behalf
* @dev Swapper contract will be the owner of this contract
* @param token Address of the token
* @param from Address from which tokens will be transferred
* @param to Receipent address of the tokens
* @param amount Amount of tokens to transfer
*/
function transferFrom(
address token,
address from,
address to,
uint256 amount
)
external
override
onlyOwner
{
require(
from == tx.origin ||
from.isContract(),
"Invalid from address"
);
IERC20(token).safeTransferFrom(from, to, amount);
}
}
// File: original_contracts/AugustusStorage.sol
pragma solidity 0.7.5;
contract AugustusStorage {
struct FeeStructure {
uint256 partnerShare;
bool noPositiveSlippage;
bool positiveSlippageToUser;
uint16 feePercent;
string partnerId;
bytes data;
}
ITokenTransferProxy internal tokenTransferProxy;
address payable internal feeWallet;
mapping(address => FeeStructure) internal registeredPartners;
mapping (bytes4 => address) internal selectorVsRouter;
mapping (bytes32 => bool) internal adapterInitialized;
mapping (bytes32 => bytes) internal adapterVsData;
mapping (bytes32 => bytes) internal routerData;
mapping (bytes32 => bool) internal routerInitialized;
bytes32 public constant WHITELISTED_ROLE = keccak256("WHITELISTED_ROLE");
bytes32 public constant ROUTER_ROLE = keccak256("ROUTER_ROLE");
}
// File: original_contracts/AugustusSwapper.sol
pragma solidity 0.7.5;
contract AugustusSwapper is AugustusStorage, AccessControl {
using SafeMath for uint256;
using SafeERC20 for IERC20;
event AdapterInitialized(address indexed adapter);
event RouterInitialized(address indexed router);
/**
* @dev Throws if called by any account other than the admin.
*/
modifier onlyAdmin() {
require(hasRole(DEFAULT_ADMIN_ROLE, msg.sender), "caller is not the admin");
_;
}
constructor(address payable _feeWallet) public {
TokenTransferProxy lTokenTransferProxy = new TokenTransferProxy();
tokenTransferProxy = ITokenTransferProxy(lTokenTransferProxy);
feeWallet = _feeWallet;
_setupRole(DEFAULT_ADMIN_ROLE, msg.sender);
}
receive () payable external {
}
fallback() external payable {
bytes4 selector = msg.sig;
//Figure out the router contract for the given function
address implementation = getImplementation(selector);
if (implementation == address(0)) {
_revertWithData(
abi.encodeWithSelector(
bytes4(keccak256("NotImplementedError(bytes4)")),
selector
)
);
}
//Delegate call to the router
(bool success, bytes memory resultData) = implementation.delegatecall(msg.data);
if (!success) {
_revertWithData(resultData);
}
_returnWithData(resultData);
}
function initializeAdapter(address adapter, bytes calldata data) external onlyAdmin {
require(
hasRole(WHITELISTED_ROLE, adapter),
"Exchange not whitelisted"
);
(bool success,) = adapter.delegatecall(abi.encodeWithSelector(IAdapter.initialize.selector, data));
require(success, "Failed to initialize adapter");
emit AdapterInitialized(adapter);
}
function initializeRouter(address router, bytes calldata data) external onlyAdmin {
require(
hasRole(ROUTER_ROLE, router),
"Router not whitelisted"
);
(bool success,) = router.delegatecall(abi.encodeWithSelector(IRouter.initialize.selector, data));
require(success, "Failed to initialize router");
emit RouterInitialized(router);
}
function getImplementation(bytes4 selector) public view returns(address) {
return selectorVsRouter[selector];
}
function getVersion() external pure returns(string memory) {
return "5.0.0";
}
function getPartnerFeeStructure(address partner) public view returns (FeeStructure memory) {
return registeredPartners[partner];
}
function getFeeWallet() external view returns(address) {
return feeWallet;
}
function setFeeWallet(address payable _feeWallet) external onlyAdmin {
require(_feeWallet != address(0), "Invalid address");
feeWallet = _feeWallet;
}
function registerPartner(
address partner,
uint256 _partnerShare,
bool _noPositiveSlippage,
bool _positiveSlippageToUser,
uint16 _feePercent,
string calldata partnerId,
bytes calldata _data
)
external
onlyAdmin
{
require(partner != address(0), "Invalid partner");
FeeStructure storage feeStructure = registeredPartners[partner];
require(feeStructure.partnerShare == 0, "Already registered");
require(_partnerShare > 0 && _partnerShare < 10000, "Invalid values");
require(_feePercent <= 10000, "Invalid values");
feeStructure.partnerShare = _partnerShare;
feeStructure.noPositiveSlippage = _noPositiveSlippage;
feeStructure.positiveSlippageToUser = _positiveSlippageToUser;
feeStructure.partnerId = partnerId;
feeStructure.feePercent = _feePercent;
feeStructure.data = _data;
}
function setImplementation(bytes4 selector, address implementation) external onlyAdmin {
require(
hasRole(ROUTER_ROLE, implementation),
"Router is not whitelisted"
);
selectorVsRouter[selector] = implementation;
}
/**
* @dev Allows admin of the contract to transfer any tokens which are assigned to the contract
* This method is for safety if by any chance tokens or ETHs are assigned to the contract by mistake
* @dev token Address of the token to be transferred
* @dev destination Recepient of the token
* @dev amount Amount of tokens to be transferred
*/
function transferTokens(
address token,
address payable destination,
uint256 amount
)
external
onlyAdmin
{
if (amount > 0) {
if (token == address(0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE)) {
(bool result, ) = destination.call{value: amount, gas: 10000}("");
require(result, "Failed to transfer Ether");
}
else {
IERC20(token).safeTransfer(destination, amount);
}
}
}
function isAdapterInitialized(bytes32 key) public view returns(bool) {
return adapterInitialized[key];
}
function getAdapterData(bytes32 key) public view returns(bytes memory) {
return adapterVsData[key];
}
function isRouterInitialized(bytes32 key) public view returns (bool) {
return routerInitialized[key];
}
function getRouterData(bytes32 key) public view returns (bytes memory) {
return routerData[key];
}
function getTokenTransferProxy() public view returns (address) {
return address(tokenTransferProxy);
}
function _revertWithData(bytes memory data) private pure {
assembly { revert(add(data, 32), mload(data)) }
}
function _returnWithData(bytes memory data) private pure {
assembly { return(add(data, 32), mload(data)) }
}
}

Contract ABI

[{"type":"event","name":"OwnershipTransferred","inputs":[{"type":"address","name":"previousOwner","internalType":"address","indexed":true},{"type":"address","name":"newOwner","internalType":"address","indexed":true}],"anonymous":false},{"type":"function","stateMutability":"view","outputs":[{"type":"address","name":"","internalType":"address"}],"name":"owner","inputs":[]},{"type":"function","stateMutability":"nonpayable","outputs":[],"name":"renounceOwnership","inputs":[]},{"type":"function","stateMutability":"nonpayable","outputs":[],"name":"transferFrom","inputs":[{"type":"address","name":"token","internalType":"address"},{"type":"address","name":"from","internalType":"address"},{"type":"address","name":"to","internalType":"address"},{"type":"uint256","name":"amount","internalType":"uint256"}]},{"type":"function","stateMutability":"nonpayable","outputs":[],"name":"transferOwnership","inputs":[{"type":"address","name":"newOwner","internalType":"address"}]}]
            

Deployed ByteCode

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